• Ice class 1A super LNG tanker Coral EnergICE
1/1
Ice class 1A super LNG tanker Coral EnergICE

Bakker Sliedrecht delivers electrical installations of the Coral EnergICE

26 February 2018

Bakker Sliedrecht has delivered the electrical installations of the Coral EnergICE. Anthony Veder will operate this super Ice class 1A super LNG tanker, with a loading capacity of 18000 m³.

Responsible for all electrical installations

Bakker Sliedrecht was responsible for the engineering, installation and commissioning of all electrical installations. Key elements of this project were:

  • 1 x Main low voltage switchboard 450 V
  • 1 x Emergency low voltage switchboard 450 V
  • Distribution systems 450 V and 230 V
  • UPS systems 450 V and 230 V
  • Navigation and communication systems
  • BIMAC Alarm-and-monitoring system
  • Full led exterior lighting
  • De-Icing and winterization installations according cold notation Issues (1A supper)
  • Electrical system integration

BIMAC Alarm-and-monitoring system for a dual fuel system

The main engine of the Coral EnergICE is equipped with a dual fuel system, allowing the vessel to sail on both Marine Gas Oil (MGO) and LNG. Furthermore, two auxiliary generators run on gas and one auxiliary generator runs on MGO. To provide operators with accurate information on crucial systems, Bakker Sliedrecht adapted its alarm-and-monitoring system BIMAC, to be compatible with different fuel types within one vessel.

Extensive testing

For Bakker Sliedrecht, the Coral EnergICE is the first vessel that runs on gas engines. Therefore, Bakker Sliedrecht arranged extensive testing of the main switchboards and gas engines in a real life setting before installing the systems on board of the vessel.

nieuws afbeelding Eneco awards maintenance contract to Bakker Sliedrecht for high- and low voltage installations of 24 wind farms
20 February 2018

Eneco has awarded a contract to Bakker Sliedrecht for maintaining the high voltage and low voltage installations...

nieuws afbeelding Croonwolter&dros and Bakker Sliedrecht to deliver complete electrical installation of integrated reel lay vessel for Subsea 7
13 February 2018

Croonwolter&dros and Bakker Sliedrecht have obtained the order to engineer, manufacturer, install and...

nieuws afbeelding Bakker Sliedrecht replaces sand pump drive of cutter suction dredger Huta 14
06 February 2018

Bakker Sliedrecht has successfully replaced the sand pump drive of the cutter suction dredger Huta 14. The...

nieuws afbeelding Bakker Sliedrecht finishes retrofit of deep-sea winch drive system of research vessel Pelagia
19 January 2018

Before embarking on a global ocean research expedition, the research vessel Pelagia of the Royal Netherlands...